top of page

Angled Design: TEWS-Series

Straight design: TES-Series

Multi-Design: TQSM-Series

Electric Torque Wrench

Made in Germany-1.png
Gerade elektrischer Drehmomentschrauber mit Kabel
  • 2-speed gearbox right/left

  • Electric torque wrenches available from 200 to 15,000 Nm of torque

  • 200 torque settings

  • Torque cut-off system at target torque with an accuracy of +/- 3.5% for the same joint

  • Available in 230 and 110 volts

  • High speeds for precise and fast screwdriving

  • The control unit can be positioned as required thanks to the 360° freely rotatable drive motor

  • With the help of the JUWEL load release, the drive motor turns in the opposite direction of rotation for a short moment when the screw connection is complete. This enables the socket to be easily released.

  • Support made of high-strength material

Advantages of the TES series

Griff und Trigger eines elektrischen Drehmomentschraubers

Reliable and powerful drive technology

For the drive technology for our JUWEL gear units, we rely on our long-standing German development partners. Since the motors of the TES series are deliberately not operated at maximum load, this results in high power reserves, which contribute significantly to the longevity of the JUWEL electric nut runners. 

2-speed full metal gearbox

The JUWEL full metal gearbox gives you 200 torque settings with two gears within the TES series. The electric torque wrenches switch off automatically at your desired torque in counterclockwise and clockwise rotation.

Detailaufnahme eines Getriebes des Drehmomentschraubers
Getriebe und AbstÞtzung eines Drehmomentschraubers

Standard and Heavy Duty Gears

Getriebe und AbstÞtzung eines Drehmomentschraubers

Electric torque wrenches are subjected to different loads: Duration and frequency of bolting, thermal or mechanical stresses must be taken into account. Our JUWEL modular gear units (right, e.g. TES-355) have additional bearings and modular gear unit housings. This increases the wear resistance enormously (heavy-duty models).

Not every customer stresses a electric nut runner permanently and under special conditions - for these there are our TES standard models (left, e.g. TES-354)

JUWEL load release

Especially when screwing with high torques, the torsion between the slip-on nut and the support is noticeable as a more difficult removal of the electric torque wrench from a screw. Thanks to the JUWEL load release, the electric torque multiplier turns a small number of degrees in the opposite direction of rotation after successful tightening. This simplifies setting down, speeds up tightening and increases work safety.

Aufstecknuss und AbstÞtzung eines elektrischen Drehmomentschraubers

Technical Data

Skizze eines elektrischen Drehmomentschraubers mit Maßangaben
Typ/Type
TES-84
TES-104/105
TES-244/245
TES-354/355
TES-505
TES-604/605
TES-904/905
TES-1205
TES-1505
Antriebsvierkant/Square drive A
3/4" / 1"
1"
1"
1 1/2"
1 1/2"
1 1/2"
1 1/2"
1 1/2"
2 1/2"
Artikelnummer Schwerlast/Item number heavy load
-
50 105 110
50 245 120
50 355 130
50 505 140
50 605 150
50 905 160
50 915 170
50 915 180
Artikelnummer Standard/Item number standard
50 084 100
50 104 110
50 244 120
50 354 130
-
50 604 150
50 904 160
-
-
Drehmoment/Torque (Nm)
150 - 850
280 - 1.200
360 - 2.500
360 - 3.500
700 - 5.000
816 - 6.000
1.024 - 10.000
1.024 - 12.000
1.440 - 15.000
Gewicht AbstÞtzung/Weight reaction arm (kg)
1,6
1,6
1,6
3,5
3,5
5,7
5,7
5,7
11
Gewicht/Weight (kg)
8/8,2
8,2
9,5
10,4
12,6
15,9
18,9
29
36
HÃķhe/Height C (mm)
55-75
75
75
95
95
110
110
115
145
HÃķhe/Height H (mm)
530/540
540
570
580
650
635
680
680
695
Leerlaufdrehzahl/Idle speed (U/min)
16
14
10
9
3
6,5
2,5
2
2
Ø Getriebe/Gear Schwerlast/Heavy Duty D (mm)
99
99
99
99
99
135
135
172
175
Ø Getriebe/Gear Standard D (mm)
88
88
88
88
-
130
130
-
-

Your product inquiry

Are you already interested in specific models? (Standard)
Are you already interested in specific models? (heavy duty)
Interest in other types of drive (besides electric)

Thanks! We'll get in touch.

Models

A single electric torque wrench within the TES series would not meet the diverse requirements of our customers' bolting cases. After thousands of bolting operations accompanied by us, we have seen a lot. The multi-stage JUWEL modular gearbox with additional bearing for increased robustness or the optimal dimensioning of the support are essential empirical values that we are happy to pass on to you.

Weight-optimized design ideal for small torques

The TES-84 and -104 models are your reliable torque wrenches for screw connections with torques of up to 1,200 Nm.

Modell eines geraden, kabelgebundenen elektrischen Drehmomentschraubers TES-104

 JUWEL TES-104
(max. 1.200 Nm)

Modell eines geraden, kabelgebundenen elektrischen Drehmomentschraubers TES-245

Robust construction for demanding screwing cases

Starting with the electric nut runners TES-244/245, we distinguish between heavy-duty (left) and standard gear units (right). The heavy-duty gear units are characterized by additional bearings and a modular gear unit design. This highly robust design is ideal for intensive and regular bolting operations.

 JUWEL TES-245
(max. 2.500 Nm)

TES - torques up to 15,000 Nm

For decades, the JUWEL TES series has been synonymous with high reliability and accuracy even under extreme conditions. The three-stage JUWEL modular gearbox with additional bearing enables you to achieve torques of up to 15,000 Nm. In addition, we equip our devices from TES-904/905 with a sturdy handle for ergonomic handling.

Modell eines geraden, kabelgebundenen elektrischen Drehmomentschraubers TES-1505

 JUWEL TES-1505
(max. 15.000 Nm)

Summary

The JUWEL-TES series is adapted to the requirements of our customers and available with various performance levels. However, all models have one thing in common: Driven by the passion to create a sustainable and valuable electric torque wrench for our customers, you can look forward to a robust and reliable electric torque wrench - a JUWEL among tools.

Please refer to our technical data for more detailed information on the respective models. If you are still hesitating after that, please do not hesitate to contact us and take the opportunity to hold a demo unit in your hands: Screwing with a TES is best experienced live!

TES - In use for decades

Elektrischer-Drehmomentschrauber-Getriebe-1.jpeg

JUWEL electric torque wrenches have made a name for themselves in the market. Up to 15,000 Nm and with optional heavy-duty gearboxes, they are indispensable in industries such as wind energy, mining or recycling

​

We are particularly proud of the fact that even units that are more than 20 years old are still sent in for maintenance. And what do we do? We still repair and calibrate these devices (even if one or two things have changed in the gearbox). No need to buy a new one - thanks to our own CNC production, we remain flexible.

​

Our goal? To be your first torque wrench supplier, but definitely your last - become part of the family.

Accessories

Seitenantrieb fÞr enge Verschraubungsanwendungen

Side drive for difficult space conditions

SonderabstÞtzung mit extra Griff

Special reaction arm with handle for better ergonomics

Modell eines Inbuseinsatzes mit Inbushalter fÞr Innensechskantschrauben

Allen key holders and inserts made from high-strength materials

This is only a small part of all our accessories for electric nut runners. After thousands of bolted joints, we have seen a lot - we are happy to pass on our experience to you in the form of individual accessories for a safe bolted joint!

More nutrunners

Abgewinkelter elektrischer Drehmomentschrauber
Elektrischer Multi Drehmomentschrauber

JUWEL TEWS-Series

Your reliable electric nut runner when space is tight in the screwdriving environment. Learn more!

JUWEL TESM-Series

Do you have changing system requirements and neither the straight nor the angled torque wrench suits you 100%? Why not both in one device? Learn more!

JUWEL - TES in action

In this video we introduce you to the TES electric torque wrench. We look forward to your inquiry!

My project-1-2.png
My project-1-3.png

Open your JUWEL product now!

Our JUWEL electric torque wrenches are delivered as standard in a noble and robust sheet metal case with textured foam insert (here exemplary the TQX). The additional lid padding and the accurately cut placeholders for your accessories ensure a firm hold and safe transport. Attention: Opening the case in real life is even more fun!

bottom of page